Online Message | Management
+ 86 13867185968
Speciality in sheet metal fabrication
Contact Us
  • Tel:+ 86 13867185968
  • Address:Jieting Town, Zhuji City, 311800 China

Casters are ubiquitous in our lives. From the most common chairs, tables, kitchens, refrigerators and other equipment , the application of casters has brought great convenience.

Well, what should we pay attention to when buying casters in daily life? EET casters will give you a detailed understanding.

First of all, we should consider the size of the road surface, the residues (such as iron scraps, grease), the environmental conditions (such as high or low temperature) and the weight to be carried by each caster, and then decide on the suitable caster material.

Generally speaking, the running of casters on the ground is almost a purely theoretical state. Casters leave the ground briefly on uneven surfaces, or over thresholds, tracks, and pits. So when they are suddenly overloaded, or when only three of the four casters touch the ground, they must carry the entire load.These must be taken into account when calculating load.

Usually the bigger the diameter of casters is, the easier to push, the greater the load capacity is, in addition to protecting the ground from damage. When choosing the size of the diameter, the weight to be loaded and the starting thrust of the carrier under the load should be considered first.

Ball bearings can carry heavy loads and are more flexible when the resistance is smaller and the rotation is more flexible.


304 stainess steel castor bracket

New polyurethane wheel with dust cover design. It is anti-winding and anti-dust, which is a good news for textile mills、chemical fiber factory and clothing factory. 4.Heavy casters with three bearings

The key of this product is that three bearings are used in a single wheel. The making process is very difficult. If there is a slight error, the tube won`t fit in. The bracket is made of 6 mm thickness high precision steel plate, which has small clearance and greatly improved service life. The weight distribution of the three bearings is more uniform in using, so the bearing capacity is much higher than other ordinary casters. The push is also more flexible. Really recommend products.

Heavy casters. A bracket of 10mm thickness. Plain bearings are used for positioning, while taper bearings are used for holding. One ton per wheel, no problem.

Anti-winding series of nylon wheels. The wheel is easy to push, anti-winding,and has a big load. It prevents packing tape, yarn, and plastic bags from winding the wheels. Best choice for textile factories, warehouses and etc.

High polymer elastic TPR medium castor. The specs are 3, 4 and 5 inches. The biggest advantage of this material is that it is silent, wear-resistant, flexible and does not hurt the ground. It is the best partner of floor paint protection such as electronics factory.

Full nylon single wheel with 6205 bearings with sizes of 6, 8 and 10 inches. It is standard equipment for textile mills and can also be used on carts. It is also has wear-resistant, easy to drive, flexible operation, long life and other advantages.

High temperature resistant casters

It can work in 280 degrees Celsius environment, reliable quality, is the necessary assistant of food factory oven.

Full Carbon Steel Chassis Adjusting Pad

Chassis sizes are 50, 60, 80 and 100

Screw sizes are 100, 150 and 200

Screw diameters are M10, M12, M16 and M20


Customer Service Center

Zhejiang East Eagle Technology Co., Ltd.


Customer Service Hotline

+ 86 15925612032

+ 86 13867185968

Expand Customer Service